Skip to content
Limited time offerWebsites from CA$700 CA$490ends Thursday 3 DecemberSee your website
Get started

ESPHome

Build your own smart-home devices from inexpensive parts

Guided installationFreeCommand-line toolActively maintainedNo verified open-source licence

What it does

ESPHome lets you turn low-cost microcontroller boards into custom smart-home sensors and switches by writing short configuration files rather than program code.

Who it's for

Makers and hobbyists who enjoy electronics projects.

Key features

  • Simple configuration instead of coding
  • Wireless updates
  • Integrates directly with Home Assistant

Compatibility

NOVI never presents a guess as verified.
  • WindowsUnknown

    No official build, package or documentation for this system was found.

  • macOS (Apple Silicon)Evidence-supported

    Available as an official Homebrew package (“esphome”).

  • macOS (Intel)Evidence-supported

    Available as an official Homebrew package (“esphome”).

  • LinuxUnknown

    No official build, package or documentation for this system was found.

What do these labels mean?
Confirmed
NOVI users have completed verified installations on this system.
Evidence-supported
The project publishes an official build or package for this system.
Inferred
Likely to work based on how the project is built, but not confirmed.
Unknown
We have not found enough evidence either way.
Unsupported
The project does not support this system.

How to get it

Guided installation

NOVI walks you through the official installation steps, one at a time. Difficulty: Advanced.

macOS (Apple Silicon)Guided

Install with Homebrew

Installs command-line software using Homebrew on macOS or Linux. You run these steps yourself; NOVI does not install anything from this website.

  1. 1

    Make sure Homebrew is installed. Homebrew is a free, widely used tool for installing software on a Mac. Open the Terminal app and type “brew --version”. If you see a version number you already have it; otherwise follow the one-line instructions on brew.sh. Open

  2. 2

    Copy this command into Terminal and press Return. It installs the package from Homebrew's official catalogue only. Homebrew checks the download against a known checksum.

    brew install --formula homebrew/core/esphome
  3. 3

    Check it worked. Run this command; it should print the installed version:

    brew list --formula --versions esphome
  4. 4

    See the official package listing. Shows exactly what Homebrew installs and where it comes from. Open

macOS (Intel)Guided

Install with Homebrew

Installs command-line software using Homebrew on macOS or Linux. You run these steps yourself; NOVI does not install anything from this website.

  1. 1

    Make sure Homebrew is installed. Homebrew is a free, widely used tool for installing software on a Mac. Open the Terminal app and type “brew --version”. If you see a version number you already have it; otherwise follow the one-line instructions on brew.sh. Open

  2. 2

    Copy this command into Terminal and press Return. It installs the package from Homebrew's official catalogue only. Homebrew checks the download against a known checksum.

    brew install --formula homebrew/core/esphome
  3. 3

    Check it worked. Run this command; it should print the installed version:

    brew list --formula --versions esphome
  4. 4

    See the official package listing. Shows exactly what Homebrew installs and where it comes from. Open

NOVI never installs software from your browser. Downloads come directly from the project or its publisher. Only install software you trust.

Get it working

A free, personal setup plan for your computer: the official download, exact steps, and a checklist. Saved in your dashboard, with help if you get stuck. NOVI never installs or runs anything on your computer.

Requirements

  • Homebrew for automatic install — Installs command-line software using Homebrew on macOS or Linux. The NOVI companion checks whether it is present.

Trust and security

  • license

    No verified open-source licence.

    GitHub could not match this repository to a recognised open-source licence. The code is public, but you should not assume you may modify or redistribute it. Check the repository's licence terms.

    Source
  • distribution

    Distributed through Homebrew, an established package source.

    The package manager checks downloads against a published checksum before installing.

    Source

NOVI checks licences, maintenance activity and distribution sources. NOVI has not audited this project's code and does not certify it as secure. Only install software you trust.

Reviews

No reviews yet

Be the first to share your experience with ESPHome. NOVI never shows invented reviews.

Sign in to write a review.

Recent releases

From GitHub
  • 2026.11.0b4Pre-releaseNov 12, 2026

    - [sendspin] Add bits_per_sample to the media source [esphome#22313](https://github.com/esphome/esphome/pull/22313) by [@kahrendt](https://github.com/kahrendt) (new-feature) - [core] Inline InterruptLock on ESP8266 [esphome#22455](https://github.com/esphome/esphome/pull/22455) by [@bdraco](https://github.com/bdraco) - [esp32_ble_server] Size the BLE2902 value buffer to its 2 byte value [esphome#22454](https://github.com/esphome/esphome/pull/22454) by [@bdraco](https://github.com/bdraco) - [ota] Skip the auth request when the password is empty at run time [esphome#22485](https://github.com/esphome/esphome/pull/22485) by [@swoboda1337](https://github.com/swoboda1337) - [dsmr] Update dsmr_parser to 1.11.0 [esphome#22530](https://github.com/esphome/esphome/pull/22530) by [@PolarGoose](https://github.com/PolarGoose) - [esp8266] Skip other devices' known mDNS answers without allocating (Arduino core 3.1.2-esphome.4) [esphome#22533](https://github.com/esphome/esphome/pull/22533) by [@bdraco](https://github.com/bdraco) - [mipi_dsi] Keep the panel running while flash is written [esphome#22535](https://github.com/esphome/esphome/pull/22535) by [@clydebarrow](https://github.com/clydebarrow) -

    Full release notes
  • 2026.11.0b3Pre-releaseNov 9, 2026

    - [vl53l0x] Recover from a failed I2C read instead of stalling [esphome#19235](https://github.com/esphome/esphome/pull/19235) by [@teklabania](https://github.com/teklabania) - [ht16k33] Rename display_off method [esphome#22352](https://github.com/esphome/esphome/pull/22352) by [@guillempages](https://github.com/guillempages) - [core] Add cg.static_buffer for config-sized static buffers [esphome#22326](https://github.com/esphome/esphome/pull/22326) by [@bdraco](https://github.com/bdraco) - [ht16k33_char] Name the I2C bus in the component test [esphome#22372](https://github.com/esphome/esphome/pull/22372) by [@bdraco](https://github.com/bdraco) - [tsl2591][seeed_mr24hpc1] Drop device classes from unitless sensors [esphome#22375](https://github.com/esphome/esphome/pull/22375) by [@swoboda1337](https://github.com/swoboda1337) - [ld2410][ld2412][ld2420] Drop device classes from unitless gate and light entities [esphome#22374](https://github.com/esphome/esphome/pull/22374) by [@swoboda1337](https://github.com/swoboda1337) - [wifi] Create the IPv6 link-local through lwIP on connect [esphome#22364](https://github.com/esphome/esphome/pull/22364) by [@randybb](https://github.com/randybb) - [

    Full release notes
  • 2026.11.0b2Pre-releaseNov 6, 2026

    - [voice_assistant] Do not treat "playback has not started" as "playback finished" [esphome#19408](https://github.com/esphome/esphome/pull/19408) by [@psewar](https://github.com/psewar) - [bme280_base][bmp280_base] Compensate raw 0x80000 when the channel is enabled [esphome#22236](https://github.com/esphome/esphome/pull/22236) by [@swoboda1337](https://github.com/swoboda1337) - [deep_sleep] Fix ESP32-P4 deep sleep [esphome#22246](https://github.com/esphome/esphome/pull/22246) by [@clydebarrow](https://github.com/clydebarrow) (breaking-change) - [esp32_ble] Fix build on Windows when Bluedroid's private headers are not reachable [esphome#22257](https://github.com/esphome/esphome/pull/22257) by [@bdraco](https://github.com/bdraco) - [ld2410][ld2412] Drop signal_strength device class from the gate threshold numbers [esphome#22259](https://github.com/esphome/esphome/pull/22259) by [@bdraco](https://github.com/bdraco) - [core] Dump typed_schema types that have no keys of their own [esphome#22258](https://github.com/esphome/esphome/pull/22258) by [@bdraco](https://github.com/bdraco) - [tfluna] Drop signal_strength device class from the signal strength sensor [esphome#22260](https://github

    Full release notes
  • 2026.11.0b1Pre-releaseNov 4, 2026

    https://beta.esphome.io/changelog/2026.11.0.html

    Full release notes
  • 2026.10.2Nov 2, 2026

    - [http_request] Fix macOS host build with the precompiled header [esphome#21705](https://github.com/esphome/esphome/pull/21705) by [@clydebarrow](https://github.com/clydebarrow) - [esp32][audio_http] Keep TLS 1.3 working [esphome#21786](https://github.com/esphome/esphome/pull/21786) by [@agners](https://github.com/agners) - [core] Start the Apple Silicon cc1plus wrapper through sh when the Python path has a space [esphome#21967](https://github.com/esphome/esphome/pull/21967) by [@bdraco](https://github.com/bdraco) - [host] Offer the built program as a download in the Device Builder [esphome#22114](https://github.com/esphome/esphome/pull/22114) by [@swoboda1337](https://github.com/swoboda1337) - [bluetooth_proxy] Release held connections when a new client replaces the subscriber [esphome#22077](https://github.com/esphome/esphome/pull/22077) by [@bdraco](https://github.com/bdraco) - [ota] Work around the LibreTiny OTA issue that bricks RTL8710B on a compressed update [esphome#22111](https://github.com/esphome/esphome/pull/22111) by [@bdraco](https://github.com/bdraco)

    Full release notes

Where this information comes from

  • Description, audience and features: Written by NOVI editors from the project's README and official website. link
  • Statistics, licence and releases: GitHub API link
  • Available through Homebrew: Official package registry link

GitHub data last refreshed 3 days ago. ESPHome is the property of its authors. NOVI is not affiliated with this project.

Similar projects

More in Smart Home